Installation of the Steam Generator:
1 - Switch off all power supply before installation and check whether you have the correct model for your steam room
according to page 5.
2 - Do not install the generator outdoors, in wet / moist, freezing or corrosive conditions. Do not install the generator near to flammables such as oil paint, diluents and fuel. Be alert to the steam pipeline and safety valve because high
temperature steam is dangerous to customers.
3 - Generator must be installed level.
4 - The generator should be installed in a dry and well-ventilated place. It can be installed either on the wall or on the ground, but must be well fixed. Install the generator as close to steam room as possible, such as in the closet, under the wash basin in the basement or in the roof space. Please see Fig.1.
i. Install the generator on the wall: drill two small holes with diameter of 8mm on the wall, insert the expansion screws and then hang the generator on those screws.
ii. Install the generator on the ground or deck: Install the frame on the site and then screw the generator into the frame.
iii. For better service and maintenance, please install the generator with the nameplate facing to the front and leave
more than 250mm space around the generator.