Installation of the Power Wire.

Caution:

- The power supply should be 220—240V, 50/60Hz, please refer to Table 2 on page 5 of this manual

- The selection of fuse and breaker must strictly follow the data in Table 2.

- Choose the suitable power wire according to Table 2 and national guidelines.

- Take off the back cover of the generator and insert the 3-core power wire (single phase, 220～240V，50/60Hz ) into the hole at the back of the generator case and connect to the correct terminal. (Please see Fig.6).

Single phase, 220～240V，50/60Hz power supply: connect the live wire to the terminal labelled as “L(L1)” ; connect the
neutral wire to the terminal labelled as “N (L2)” ; and connect the ground wire to the terminal labelled as “ ”.